← Back to the Resonator card · All how-to pages
How to use
Resonator
FREE · download it from its card
What it does
Resonator makes a sound ring like a physical object. It runs the input (or a strike of noise) through a bank of tuned resonances shaped like one of four bodies: METAL, WOOD, MEMBRANE or TUBE. Tune the body, set how long it rings, and strike it with a trigger, or play it from a V/OCT pitch.
It is stereo, and it also gives you the excitation envelope and the raw body sound on their own jacks.
Quick start
- Patch L OUT and R OUT to your mixer.
- Press STRIKE: the body rings. Press MODE to step through METAL, WOOD, MEMBRANE and TUBE (the screen shows which).
- Turn BODY to tune it and DAMPEN to set how long it rings.
- Patch a trigger (a drum sequencer, EUCLID) into the STRIKE jack to play it in time, or patch audio into IN L to ring that sound through the body.
Controls
Body
- BODY: tunes the body, from a low thud to a high ping.
- RES: how strongly the body's resonances sing.
- DAMPEN: how long the body rings. Turn it up for a longer, purer ring, down for a short knock.
- MODE: steps through METAL, WOOD, MEMBRANE and TUBE. Each has its own overtones and its own colour on the light.
Excitation
- STRIKE (button) and the STRIKE jack: hit the body. A held gate strikes once.
- EXCITE: how hard the strike and the input drive the body.
- IN L / IN R: audio into the body. IN L alone feeds both sides.
Mix
- BLEND: dry / wet between the input and the ringing body.
CV
- The row of jacks under the knobs adds CV to BODY, RES, EXCITE and BLEND.
- TUNE, RES, EXCITER, DAMPEN: more CV inputs for those settings. V/OCT plays the body in tune: 1 V up is an octave up.
Outputs
- L OUT / R OUT: the main stereo output.
- ENV: the strike's envelope as CV.
- BODY: the ringing body on its own (left side), without the dry signal.
Jacks
Inputs
- Cutoff knob CV
- Resonance knob CV
- Exciter knob CV
- Mix knob CV
- In L
- In R
- Tuning CV
- Resonance CV
- V/Oct
- Exciter CV
- Damping CV
- Strike CV
Outputs
- Out L
- Out R
- Excitation env
- Body tap
N = 1, 2, 3 ... (one jack per track, channel or strip). Hover a jack in Rack for the same text.
Tips
- Strike it with KICK, SNARE/HAT or EUCLID triggers for tuned percussion, or ring POLY chords through its bodies.
- Patch a sequencer's pitch into V/OCT and its gate into STRIKE for a melodic mallet or bell line.
- ENV makes a handy decay envelope: patch it to a filter so it opens with every strike.
- MEMBRANE with BODY low and DAMPEN down makes a tom or hand-drum thump.