NoiZeeToYz

← Back to the GLITCH-ECHO card · All how-to pages

GLITCH-ECHO module

How to use

GLITCH-ECHO

NoiZee ToyZ pack · coming soon to VCV

What it does

GLITCH-ECHO is a stereo performance effect locked to the tempo. Hold one of its eight pads and the sound stutters, plays backwards, falls in pitch, stops like tape or chops on the grid. Each move waits for the next beat division to start and finishes its repeat when you let go, so it always lands in time.

CRUSH and SWEEP stack on top of any move, and an echo follows everything, with FREEZE to hold it. Switch on AUTO and it glitches by itself, a few times a bar at the chance you set.

Quick start

  1. Patch a drum loop or mix into IN L (and IN R for stereo; with only IN L patched, both sides get it). Take OUT L / OUT R to your mixer.
  2. Patch a 16th-note clock into CLOCK (for example CLK OUT of MTX-1), or set the BPM knob to your tempo.
  3. Hold ROLL 1/16 while it plays: the sound repeats in 16ths until you let go. Try REVERSE, PITCH DN and TAPE STOP.
  4. Hold CRUSH or SWEEP together with a move for more damage.
  5. Turn up ECHO MIX, then click FREEZE to hold the echo.
  6. Click AUTO and set CHANCE to let it glitch on its own.

Controls

Hold pads

Glitch knobs

Echo

AUTO and tempo

Screen

Controller and jacks

Jacks

Inputs

  • Left or mono
  • Right
  • Clock 16th notes
  • Reset
  • gate N
  • Freeze gate
  • Auto chance CV 0-10 V adds up to 50 %

Outputs

  • Left
  • Right
  • Glitch a trigger when a move starts

N = 1, 2, 3 ... (one jack per track, channel or strip). Hover a jack in Rack for the same text.

Tips

← Back to the GLITCH-ECHO card